White 2-155

Modeler Name: 
Tim Mattson

Tim shared us some photos of his White 2-155, which was quite involved.  I'll let Tim fill us in:  "I used the hood from the Ertl 4-210.  Did quite a bit of work to the cab including adding an interior from a JD 4440 and cut out the rear to make room for the 3 point hitch.  Also used the rear axle housing from the Deere for a little better detailed axles.  Scratch built the front axle, battery box, fuel tank, dash board, and hitch.  Added TractorFab front weights, steering wheel, windshield wiper, and door handle"

White 2-155 by Tim Mattson
White 2-155 by Tim Mattson
White 2-155 by Tim Mattson
White 2-155 by Tim Mattson